The Amicus is similar in design to our fully customizable Contender, but since it's cage is pre-made for us it is not as fully adjustable and only a couple modifications are possible.
The cage is available in two widths...1-1/4 inches or 1-3/8 inches. These measurements are the inside diameter of the cage. No other cage sizes are available. If one of these cage diameters will work for you, then the Amicus will be a less expensive and excellent alternative to purchasing a fully customized Contender. The three lengths offered will allow the device to fit most men.
Like all our devices, the Amicus is made of Stainless Steel and is polished. You choose your preferred lock style, and a round or oval base-ring.
A Prince Albert adaptation is not available for this cage because it's cap is not long enough for the locks setback.
A padlock may be used to connect the cage to the base-ring, or you may choose a propietary high-security screw made exclusively for MaleChastityNow.
A "Master Lock" brand padlock model 120 is the lock of choice when using a padlock, but any small padlock that has a 1/8th inch wide shackle will work.
The design of our security screw offers the highest degree of security of any available screw in the world. You won’t find this security screw anywhere else but here. The drive socket inside the screw is a proprietary design, made exclusively for MCN.
A hexagonally shaped "Bit" is used to lock secure a screw to a device. The shaped head on the front of the Bit matches the socket in the screw.
Three variations of the Hex Bit are offered for purchase:
1. The first version is a plain Hex Bit. With the option you will need to provide a "driver". Fortunately there are a many, many types and designs of drivers available across the planet. The driver you choose to use will need to be able to tighten a 1/4 inch hex bit.
2. The second version is an MCN Key. We take a Bit and turn it into a key for you. The sleeve surrounding the Bit is made of stainless steel, and the attached key ring allows you to carry it with your other keys, as well as providing you with a place to grip the key while tightening the security screw. There's no need for a separate driver with this choice.
3. Our third version goes one step further, and turns a MCN Key into and Emergency Key. An outer shell is placed over an MCN key and is locked in place with a single-use security seal. 10 seals are included with each Emergency Key that is purchased, and more seals are available in the section of the website labeled "MCN Lock System."
Every device using the MCN high-security system is sold with one screw and one of the chosen Keys or Bits. Spare Keys and Bits are available in the "MCN Lock System" section of the website.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: