The Adaptus chastity device begins with a pre-made cage, thereby creating a less expensive device than if you were to order an entirely custom built device such as a Contender.
- You choose your base ring diameter and we hand make one of our base rings to fit you. You choose a round or oval ring, and a gap that fits your needs.
- Two lock systems are available...padlock or our propietary high-security screw.
The Adaptus is available in only one cage size...the cage is 2-1/4 inches long, and it's rings have an inside diameter of 1-3/8 inches. The cap is not long enough for a Prince Albert attachement to be added to this cage.
With an attached base ring the device works best for penis lengths around 2-3/4 inches. Expect some "spare room" if you're shorter than this, and expect to "stuff" yourself into the device if you're longer.
The cage weighs 3.3 ounces. With one of our base rings the weight will be approximately 5-1/4 ounces, depending upon your chosen base ring diameter. Wider base-rings are available for those who need them.
A padlock may be used to connect the cage to the base-ring, or you may choose a propietary high-security screw made exclusively for MaleChastityNow.
A "Master Lock" brand padlock model 120 is the lock of choice when using a padlock, but any small padlock that has a 1/8th inch wide shackle will work.
The design of our security screw offers the highest degree of security of any available screw in the world. You won’t find this security screw anywhere else but here. The drive socket inside the screw is a proprietary design, made exclusively for MCN.
Two differernt key designs are available for purchase:
1. The first version is an MCN Key. The attached key ring allows you to carry it with your other keys, as well as providing you a place to grip the key while tightening the security screw.
2. The second version turns the MCN Key mentioned above into and Emergency Key. If you need to be away from your keyholder and have to remove your device due to an emergency, this key will allow you to do that.
An outer shell is placed over an MCN key and is locked in place with a single-use security seal. Your keyholder records the numbers on the seal that locks your key inside its sleeve, and will know if you've cheated because the plastic seal must be broken to remove the key from its shell.
Every device using the MCN high-security system is sold with one screw and one of the chosen Keys. 10 seals are included with each Emergency Key that is purchased. Spare Keys, Security Screws, and Seals are available in the the section of the website labeled "MCN Lock System."
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: