The Skullcap is another of our introductory chastity devices that is semi-customizable. Its pre-made cage has an inside diameter of 1-1/4" and is crafted from 304 stainless steel. It is available in two lengths, which will fit the majority of men.
The longer cage is 2-1/2 inches. Note that this is only the cage length. If you factor in the base ring thickness and gap, then the device works well for men whose flaccid length is 3 inches.
The shorter cage is 1-3/4 inches in length. Again, this is only the cage length, so if you factor in base-ring thickness and gap, then the device works well for those whose flaccid length is around 2-1/2 inches.
If you're shorter than 2-1/2 inches when flaccid there will be some open space inside the cage.
Base-rings are hand made from 316L stainless steel in your chosen size. Base-ring width on all our devices is measured by inside diameter. You choose a round or oval base-ring, and a gap that fits your needs.
There is no good way to measure gap, but the 3/8" gap works the best for the majority of men, and can be easily adjusted later if necessary. You may send the ring back for a adjustment...you pay for return shipping but there's no charge for the actual adjustment.
Three lock systems are available...padlock, security screw, or numbered security seals. The standard lock system uses a small padlock whose shackle is 1/8 inch thick. You may use your own padlock or you may purchase a Master Lock from us. The second method of locking the cage to the base ring employs the use of a security screw. Numbered Security Seals are a third option for locking the cage to the base-ring.
The cage weighs 3 ounces. With one of our base rings the weight will be approximately 4-3/4 ounces, depending upon chosen base ring diameter.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: